Le broyeur horizontal HG6800TX est un engin performant et efficace capable de traiter des arbres entiers et autres matériaux organiques. Doté d’un moteur de 708 kW et du double tambour série III unique sur le marché, ce broyeur facile à entretenir est capable de relever efficacement les défis importants du défrichement et du traitement des déchets &mdash ; le tout en sollicitant moins l’opérateur.
| Manufacturer | Vermeer |
| Model | Broyeur horizontal HG6800TX |
| Category | Recyclage |
| Price | Request a Quote |
| Year | 2024 |
| Maximum Length - Transport | 48.1ft (14.7m) |
| Maximum Length - Transport with Dolly | 48.6ft (14.8m) |
| Maximum Length (Operation) | 56.5ft (17.2m) |
| Maximum Width Transport - with Dolly | 10ft (3m) |
| Maximum Height Transport with Dolly | 12.8in (32.5cm) |
| Weight | 92000lbs (41730.5kg) |
| Tongue Weight - Engine Option 1 with Dolly | 45000lbs (20411.7kg) |
| Axle Weight - Engine Option 1 with Dolly | 60000lbs (27215.5kg) |
| Dolly Weight | 9500lbs (4309.1kg) |
| Maximum Width (Transport) | 10ft (3m) |
| Maximum Height (Transport) | 12ft (3.7m) |
| Weight Engine Option 1 with Dolly | 105000lbs (47627.2kg) |
| Make and Model | Caterpillar C27 Tier 4F (Stage 4) |
| Number of Cylinders | 12 |
| Gross Horsepower (Maximum) | 950hp (708.4kw) |
| Torque (Max) | 3212ft-lb (4354.9Nm) |
| Fuel Tank Capacity | 350gal (1324.9L) |
| Max Fuel Consumption | 47.5gph (179.8lph) |
| Fuel Type | Ultra-low sulfer diesel (<15 ppm) |
| Air Cleaner | Dry-type with primary and secondary elements and restriction indicator |
| Oil Filter | Full-flow, spin-on |
| Recommended Oil | CAT DEO-ULS, or API CJ-4, or ACEA E9 (15w-40) |
| Oil Volume with Filter | 71.9qt (68L) |
| Cooling Medium | Liquid |
| Coolant Capacity (Engine and Radiator) | 45gal (170.3L) |
| Air to Boil Temperature | 126deg |
| Alternator | 24 volt |
| Fan | (Qty 2) Variable-speed, reversible |
| Clutch Type | Hydraulic-operated wet clutch with PTO |
| Clutch Engagement | Push-button |
| Drive Belt Type | V-belt |
| Sound Power | 120 dB(A) |
| Fan - CAC | Hydraulic (variable speed) |
| Make and Model | Caterpillar C27 Tier 2 (Stage II) |
| Number of Cylinders | 12 |
| Gross Horsepower (Maximum) | 950hp (708.4kw) |
| Torque (Max) | 3212ft-lb (4354.9Nm) |
| Fuel Tank Capacity | 350gal (1324.9L) |
| Max Fuel Consumption | 47.7gph (180.6lph) |
| Fuel Type | Diesel |
| Air Cleaner | Dry-type with primary and secondary elements and restriction indicator |
| Oil Filter | Full-flow, spin-on |
| Recommended Oil | CAT DEO-ULS, or API CJ-4, or ACEA E9 (15w-40) |
| Oil Volume with Filter | 71.9qt (68L) |
| Cooling Medium | Liquid |
| Coolant Capacity (Engine and Radiator) | 45gal (170.3L) |
| Air to Boil Temperature | 126deg |
| Alternator | 24 volt |
| Fan | (Qty 2) Hydraulically driven, reversible |
| Clutch Type | Hydraulic-operated wet clutch with PTO |
| Clutch Engagement | Push-button |
| Drive Belt Type | V-belt |
| Sound Power | 120 dB(A) |
| Feed Table Width | 60in (152.4cm) |
| Feed Table Length - Option One | 19ft (5.8m) |
| Loading Height | 6ft (1.8m) |
| Flare Construction | Integrated with infeed |
| Feed Conveyor Type | Welded slat chain |
| Drive Type | Radial piston motor |
| Drive Roller Construction | Welded steel |
| Front Idler Roller Construction | Self-cleaning steel auger |
| Infeed Floor Construction | Welded steel with replaceable UHMW wear plates |
| Infeed Roller Width | 56.3in (143cm) |
| Infeed Roller Weight | 2460lbs (1115.8kg) |
| Infeed Roller Diameter | 36.1in (91.7cm) |
| Maximum Feed Height | 50in (127cm) |
| Material Type | Fabricated steel |
| Tooth Design | Serrated bars |
| Number of Teeth | 12 |
| Drive Motor | Fixed displacement, geroler |
| Drive Planetary | (Qty 2) 34.2:1 |
| Feed Roller Down Pressure | Adjustable |
| Feed opening | 38-in (96.5-cm) high x 56.4-in (143.3-cm) wide |
| Infeed roller weight with arm | 4945lbs (2243kg) |
| Tip Diameter | 36.4in (92.5cm) |
| Millbox Opening | 60" W x 38" H |
| Drum Diameter | 28in (71.1cm) |
| Drum Cutting Width | 62.4in (158.5cm) |
| Drum Skin Thickness | 1.5in (3.8cm) |
| Drum Speed | 1200rpm |
| Bearing Type | Double row, sperical roller |
| Bearing - Inner Race Diameter | 6in (15.2cm) |
| Number of Hammers | 10 |
| Number of Tips | 20 |
| Tip option 1 | 2-bolt |
| Center Retention Pin Dimensions | 2" dia x 79.35" L |
| Drum Weight | 5321lbs (2413.6kg) |
| Tip types | Premium wide |
| Thrown Object Deflector | Standard |
| Deflector Position | Variable |
| Number of Screens | 2 |
| Screen Weight | 470lbs (213.2kg) |
| Screen Dimensions | 1" thick |
| Screen Type | Abrasion-resistant steel |
| Screen Area | 3583sq in (23116.1sq cm) |
| Millbox Lid Liner Dimensions | Abrasion-resistant steel |
| Liner Dimensions | .75, 1" (1.9 cm, 2.5 cm) thick |
| Anvil Type | Fabricated steel with replaceable wear surfaces |
| Anvil Dimensions | 6.6" x 18.2" x 81" (16.7 cm x 46.2 cm x 205.7 cm) |
| Millbox lid liner | Abrasion-resistant steel |
| Splice | R2-stainless steel or super splice |
| Length | 89.3ft (27.2m) |
| Width | 48in (121.9cm) |
| Belt Design | 3 ply - 330# or straight warp single ply 330# both with V cleat |
| Return Roller Quantity | 6 |
| Idler Roller Diameter | 12in (30.5cm) |
| Idler Roller Bearing | 1-15/16, 4-bolt flange |
| Standard Drive Roller Diameter | 12.8in (32.5cm) |
| Magnetic Drive Roller Diameter | 12.8in (32.5cm) |
| Drive Motor | Fixed displacement, geroler |
| Drive Motor Bearings | 1-15/16, 4-bolt flange |
| Belt Speed | 877ft/min (267.3m/min) |
| Load Height | 16.3ft (5m) |
| Number of Coolers | 1 |
| Tank capacity | 100gal (378.5L) |
| Recommended Oil | Vermeer HyPower 68 |
| Filtration Method | Dual in-tank return filters with suction strainer |
| System Type | Open-loop, pressure- and flow-compensated |
| Pump Type | Variable displacement, axial piston |
| Pump Flow at Maximum RPM | 63.3 gpm |
| System Relief Pressure | 4200 psi |
| System Relief Pressure | 3000 psi |
| System Type | Open-loop, pressure- and flow-compensated |
| Pump Type | Variable displacement, axial piston |
| Pump Flow at Maximum RPM | 32.3gpm (122.3L/min) |
| Motor Series | Char-Lyn 6000 Series, geroler |
| Motor Series | Danfoss KM38 |
| System Type | Open-loop, pressure compensated |
| Pump Type | Variable displacement, axial piston |
| Pump Flow at Maximum RPM | 25.7gpm (97.3L/min) |
| Fan Series - FWD/REV | Reversible |
| Number of Coolers | 1 |
| Tank capacity | 21gal (79.5L) |
| Recommended Oil | Vermeer VMF Gold |
| Filtration Method | Spin-on, pressure filter, B6 = 1000 |
| System Type | Open-loop |
| Pump Type | Fixed displacement, gear pump |
| Pump Flow at Maximum RPM | 8.9gpm (33.7L/min) |
| System relief pressure | 260psi (17.9bar) |
| System Voltage | 24 VDC |
| Battery | Group 8-D, 1400 CCA (Qty 2) |
| System Protection | Fused |
| Operational Faults | Yes |
| Display Type | LCD |
| Engine Information | Yes |
| Machine Information | Yes |
| Gauges | none |
| Switches | Push-button |
| Display Type | LCD |
| Engine Information | Yes |
| Machine Information | Yes |
| Operational Faults | Yes |
| Switches | Sealed membrane |
| Operating Range | Up to 300' (91.4 m) |
| Battery Type | AA (Qty 6) |
| Radio remote type | North America, South America, Japan: R625-60; All other regions: R524-10 |
| Fender Description | Formed steel |
| Frame Description | DT6 |
| Tongue Description | Bolt-on to infeed structure |
| Hitch Type | Fifth wheel |
| Brake Type | Air-actuated with spring-applied parking brake |
| Trailer Light Type | 12-24V LED |
| Number of Axles | 3 |
| Suspension Type | Air-ride |
| Manufacturer - Option One | Hendrickson |
| Capacity per Axle | 20000lbs (9071.8kg) |
| Tires - Option One | 255/70R22.5 duals |
| Wheels - Option One | 22.5"x8.3" hub-piloted steel |
| Ground Clearance - Option One | 5.3in (13.5cm) |
| Tires - Option Two | 445/50R22.5 LR L (super singles) |
| Wheels - Option Two | Aluminum |
| Ground Clearance - Option Two | 5.3in (13.5cm) |
| Track Drive Motor Type | Hydrostatic with planetary transmission |
| Track Frame Description | Rigid frame with reinforced box section |
| Track Type | D5 double grouser |
| Track Drive Pump Type | Variable displacement, axial piston |
| Track Brake Type | Spring-applied, hydraulic-release wet disc parking brake |
| Track Length on Ground | 142" (360.7 cm) |
| Track Width - Option One | 26" (66 cm) |
| Track Width Option One - Ground Bearing Pressure - Hard Ground | 58.3psi (402kPa) |
| Track Width Option One - Ground Bearing Pressure - Soft Ground | 11.4psi (78.6kPa) |
| Type of Idler | D5 excavator rollers |
| Number of Idlers | 20 |
| Pump Flow at Maximum RPM | 57.6gpm (218L/min) |
| System relief pressure | 5000psi (344.7bar) |
| Maximum Speed | 2.8mph (4.5km/h) |
| Maximum Creep Speed - (Low) | 1.4mph (2.3km/h) |
| Maximum Air Flow | 29cfm (.8cmm) |
| Air Compressor Brand | Mi-T-M |
| Engine | Honda, 11.7 hp |
| Maximum Pressure | 175psi (12.1bar) |
| Tank capacity (5th wheel) | 30gal (113.6L) |
| Preventative Maintenance | Yes |
| Screens | Yes |
| Special Tools Group | Yes |
| Extended Warranty | Yes |
| Special Paint | Yes |
| Air Compressor | Yes |
| Tips | Yes |
| Magnetic discharge conveyor pulley | Yes |
| Vermeer Confidence Plus Asset Protection Program | Optional |
| Drum Weight | 6707.5lbs (3042.5kg) |
| Depth of Cut | Adjustable: 1.125 in (2.86 cm) to 1.5 in (3.81 cm) |
| Number of Knives | 14 |
| Knife Thickness | .625 in (1.6 cm) |
| Useable Edges | 1 |
| Material | A8 mod chipper steel |
| Number of Bolts/Knife | 2 |
| Replaceable Threaded Knife Block | Yes |
| Number of Pockets | 14 |
| Shaft diameter | 6.5in (16.5cm) |
| Shaft Retention Type | Keyless bushing |
| Drum Weight | 6707.5lbs (3042.5kg) |
| Depth of Cut | Adjustable: .125 in (.31 cm) to 1 in (2.5 cm) |
| Number of Knives | 14 |
| Knife Thickness | .625 in (1.6 cm) |
| Useable Edges | 1 |
| Material | A8 mod chipper steel |
| Number of Bolts/Knife | 4 |
| Replaceable Threaded Knife Block | Yes |
| Number of Pockets | 14 |
| Shaft diameter | 6.5in (16.5cm) |
| Shaft Retention Type | Keyless bushing |
