Broyeur de branches BC200
- Conforme à la norme EN 13525
- Moteur phase V
- Entraînement à disque sans embrayage
- Rouleaux d’alimentation horizontaux jumeaux à déport
General
| Manufacturer | Vermeer |
| Model | Broyeur de branches BC200 |
| Category | Entretien des arbres, Paysage |
| Price | Request a Quote |
| Year | 2024 |
General Dimensions and Weights
| Length - Feed Table Up, Tongue In | 148in (375.9cm) |
| Length - Table Down, Tongue Extended | 171in (434.3cm) |
| Width | 62in (157.5cm) |
| Height | 99in (251.5cm) |
| Weight - Engine Option One | 3300lbs (1496.9kg) |
| Weight - Engine Option Two | 3230lbs (1465.1kg) |
| Tongue Weight - Engine Option One | 200lbs (90.7kg) |
| Tongue Weight - Engine Option Two | 180lbs (81.6kg) |
| Sound Power | 126 dB(A) |
| Sound Power - Engine Option Two | 117 dB(A) |
Engine - Option one
| Make and Model | Kubota V1505-CR-TES |
| Number of Cylinders | 4 |
| Gross Horsepower (Maximum) | 44.3hp (33kw) |
| Torque (Max) | 88ft-lb (119.3Nm) |
| Fuel Tank Capacity | 10.5gal (39.7L) |
| Max Fuel Consumption | 2gph (7.6lph) |
| Fuel Type | Ultra-low sulfur diesel acc. EN 590 / ASTM D975 |
| Air Cleaner | Donaldson 2 Stage Dry |
| Oil Filter | Spin-on |
| Recommended Oil | CJ-4, CK-4 |
| Oil Volume with Filter | 7.2qt (6.8L) |
| Maximum Angle of Continuous Operation | 20deg |
| Cooling Medium | Liquid |
| Coolant Capacity (Engine and Radiator) | 2.1gal (7.9L) |
| Alternator | 60 amps Kubota |
| Fan | 400 mm suction |
| Clutch Type | Direct drive |
| Clutch Drive Engagement | Direct drive |
Engine - Option two
| Make and Model | Kubota WG1605 |
| Number of Cylinders | 4 |
| Gross Horsepower (Maximum) | 57hp (42.5kw) |
| Torque (Max) | 82ft-lb (111.2Nm) |
| Fuel Tank Capacity | 10.5gal (39.7L) |
| Max Fuel Consumption | 1.8gph (6.8lph) |
| Fuel Type | Unleaded gasoline 95 Octane max 10% methanol |
| Air Cleaner | Donaldson 2 Stage Dry |
| Oil Filter | Spin-on |
| Recommended Oil | SI Multigrade SAE 10W or SAE 10W-30 |
| Oil Volume with Filter | 6.3qt (6L) |
| Maximum Angle of Continuous Operation | 20deg |
| Coolant Capacity (Engine and Radiator) | 2.1gal (7.9L) |
| Cooling Medium | Liquid |
| Alternator | 40 amps Kubota |
| Fan | 400 mm suction |
| Clutch Type | Direct drive |
| Clutch Drive Engagement | Direct drive |
Feed System
| Feed Roller Orientation | Horizontal, offset lower |
| Number of Feed Rollers | 2 |
| Feed Roller Clamp Load | 880lbs (399.2kg) |
| Feed Roller Clamp Type | Spring |
| Feed Roller Minimum Distance to Drum | 4.7in (11.9cm) |
| Feed Roller Dimension | 16 in (40 cm) |
| Number of Knives | 12 |
| Weight of Feed Roller | 77lbs (34.9kg) |
| Feed Roller Dimension (Two) | 10 in (26 cm) |
| Number of Knives (2) | 12 |
| Weight of Feed Roller (Option Two) | 44lbs (20kg) |
| Number of Feed Roller Motors | 2 |
| Motor Displacement | Upper: 465 cc, Lower: 300 cc |
| Motor Manufacturer | Danfoss |
| Feed Speed | 124ft/min |
| Infeed Table Width | 45in (114.3cm) |
| Infeed Table Length | 28in (71.1cm) |
| Infeed Hopper Height | 31in (78.7cm) |
| Infeed Throat Capacity | 8 in x 12 in (20 cm x 30 cm) |
| Pinch Point - Distance to End of Feed Table | 59in (149.9cm) |
| Distance from Feed Table to Ground | 28in (71.1cm) |
| Infeed Table Material Thickness | .1in (.3cm) |
Safety System
| Bottom Feed Stop Bar | Floating, spring return |
| Bottom Feed Stop Bar Diameter | 1.3in (3.2cm) |
| Bottom Feed Stop Bar Material Thickness | 0.12 in (3.2 mm) |
| Actuation Force (BFSB) | 33lbs (15kg) |
| Reset Method | Push button |
Drum/Disc Cutting System
| Material Capacity | 8in (20.3cm) |
| Width | 12in (30.5cm) |
| Thickness | 1in (2.5cm) |
| Diameter | 30in (76.2cm) |
| Speed | 1365 rpm |
| Weight With Shaft | 240lbs (108.9kg) |
| Safety Lock - Number of Positions | 4 |
| Number of Knives | 4 |
| Knife Thickness | .6in (1.6cm) |
| Material | A8 Chipper Steel |
| Useable Edges | 2 |
| Knife Size | 5 x 5 in (12.7 x 12.7 cm) |
| Number of Bolts/Knife | 2 |
| Number of Paddles | 4 |
| Fixture Method | Welded |
| Air Flow | 900cfm |
| Bedknife Size | Upper: 7.9 x 5.1 in (20 x 13 cm), Lower: 10.6 x 5.1 in (27 x13 cm) |
| Bedknife Thickness | .8in (1.9cm) |
| Bedknife Material | S355J2 |
| Bedknife - Number of Useable Edges | 2 |
Cutter Drive Components - Engine Option One
| Number of Bearings | 2 |
| Bore | 2.2in (5.6cm) |
| Type | Dual spherical roller |
| Manufacturer | Timken |
| Dynamic Capacity | 32500lbs (14741.8kg) |
| Static Capacity | 44400lbs (20139.5kg) |
| Belt Idler/Tensioner | Idler arm, manually adjusted |
| Belt Type | 3 rib, Classic B profile, Aramid Cord Construction |
Discharge System
| Chute Height | 99in (251.5cm) |
| Bottom Thickness | .1in (.3cm) |
| Top Thickness | .1in (.3cm) |
| Side Wall Thickness | .1in (.3cm) |
| Deflector Thickness | .1in (.2cm) |
| Chute Rotation Angle | 270deg |
| Rotation Type | Manual |
| Rotational Lock | Spring pin |
Hydraulic System
| Tank capacity | 6gal (22.7L) |
| Recommended Oil Type | Shell Tellus 68 |
| System Type | Fixed flow, open circuit |
| Filtration Method | Suction: 100 Mesh, Return: 10 Micron |
| Pump Flow at Maximum RPM | 4gpm (15.1L/min) |
| System relief pressure | 2500psi (172.4bar) |
| Auto Reverse PSI | 2300psi (158.6bar) |
| Directional Control | 12 V solenoid controlled |
Electrical System
| System Voltage | 12V |
| Battery | 12V dC, 77A/h, 760 CCA |
| Switches | Pizzato |
| Controller | MPC12 |
| Display | MPC12 |
| Shutdown System | Kubota ECU |
Chassis
| Frame Description | Ladder frame chassis, C-shaped rails |
| Tongue Description | Bolt-on, square tube |
| Hitch Type | Alko 161S - 50-mm ball coupler |
| Fender Description | Bolt-on plastic |
| Axle/Suspension | Rubber torsion |
| Type - Option One | Alko Plus 1800 |
| Manufacturer - Option One | Alko |
| Capacity - Option One | 3970 lb (1800 kg) |
| Tires - Option One | 185R14C |
| Wheels - Option One | 5,5JX14 ET30 5 x 112 |
| Brake Type | 8 in x 2 in (200 mm x 50 mm) drum, surge brake activated |
| Trailer Light Type | 13-pin connector, LED lights |
Other Options
| Special Paint | Available |
| Extended Warranty | Available |
| Preventive Maintenance | Available |
Optional turn table with fixed drawbar (petrol only)
| Length - Feed Table Up, Tongue In | 163in (414cm) |
| Length - Table Down, Tongue Extended | 186in (472.4cm) |
| Width | 65.7in (166.9cm) |
| Height | 104in (264.2cm) |
| Weight (without winch and hydraulic jack) | 3990lbs (1809.8kg) |
| Weight - Engine Option One | 3990lbs (1809.8kg) |
| Tongue Weight - Engine Option One | 220lbs (99.8kg) |
| Distance from Feed Table to Ground | 31in (78.7cm) |
| Chute Height | 104in (264.2cm) |
| Frame Description | Ladder frame chassis, s-shaped rails |
| Hitch Type | Alko 251S - 50-mm ball coupler |
| Type - Option One | Alko 1350 |
| Manufacturer - Option One | Alko |
| Capacity - Option One | 2,980 lbs (1,350 kg) per axle |
| Tires - Option One | 195/50R13 C8 |
| Wheels - Option One | 6JX13H2 ET30 5X112 |
Optional turn table with height adjustable surgebrake (petrol only)
| Length - Feed Table Up, Tongue In | 179in (454.7cm) |
| Length - Table Down, Tongue Extended | 202in (513.1cm) |
| Width | 65.7in (166.9cm) |
| Height | 104in (264.2cm) |
| Weight (without winch and hydraulic jack) | 4060lbs (1841.6kg) |
| Weight - Engine Option One | 4060lbs (1841.6kg) |
| Tongue Weight - Engine Option One | 240lbs (108.9kg) |
| Distance from Feed Table to Ground | 31in (78.7cm) |
| Chute Height | 104in (264.2cm) |
| Frame Description | Ladder frame chassis, s-shaped rails |
| Hitch Type | Alko 251VB - 50-mm ball coupler or 40-mm DIN-eye |
| Type - Option One | Alko 1350 |
| Manufacturer - Option One | Alko |
| Capacity - Option One | 2,980 lbs (1,350 kg) per axle |
| Tires - Option One | 195/50R13 C8 |
| Wheels - Option One | 6JX13H2 ET30 5X112 |
Literature
| Fiche technique BC200 | Download |