Excavatrice de surface T1055III

  • Idéale pour les gros travaux d’excavation de roches comme pour les exploitations minières à ciel ouvert, l’enlèvement de morts-terrains, la préparation de site et la démolition de routes
  • Équipée d’un moteur électronique Caterpillar® C13 ACERT Tier 3 ou Tier 4 Final qui offre la puissance nécessaire au nivellement des surfaces de votre chantier ou de votre mine
  • Elle peut être équipée d'un système de coupe efficace qui pénètre efficacement la roche de haut en bas

General

Manufacturer Vermeer
Model Excavatrice de surface T1055III
Category Exploitation minière à ciel ouvert
Price Request a Quote
Year 2024

Transport Dimensions

Approach Angle 16deg
Height Range 135 " (342.9 cm)
Length with 40" (101.6 cm) End Idler and 6 ft (1.83 m) Boom 32.2ft (9.8m)
Length with 40" (101.6 cm) End Idler and 8 ft (2.44 m) Boom 34.7ft (10.6m)
Length with 40" (101.6 cm) End Idler and 10 ft (3.05 m) Boom 37.2ft (11.3m)
Length with 40" (101.6 cm) End Idler and 12 ft (3.66 m) Boom 39.7ft (12.1m)
Length with 40" (101.6 cm) End Idler and 14 ft (4.27 m) Boom (with Restraint Bar) 41ft (12.5m)
Length with 50" (127 cm) End Idler and 8 ft (2.44 m) Boom 35.8ft (10.9m)
Length with 50" (127 cm) End Idler and 10 ft (3.05 m) Boom 38.3ft (11.7m)
Length with 50" (127 cm) End Idler and 12 ft (3.66 m) Boom 40.8ft (12.4m)
Weight Range 87,000 lbs - 124,000 lbs (39,463 kg - 56,245 kg)
Width Ranges 116 " - 122 " (294.6 cm - 309.9 cm)
Make and Model Caterpillar C13 ACERT Tier 3
Gross Horsepower 415hp (309.5kw)
Rated Engine RPM 2100
Number of Cylinders 6
Fuel Tank Capacity 200gal (757.1L)
Operating Range 9.58 hours
Fuel Consumption at Full Load 20.9gph (79.1lph)
Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles) 35deg
Air Cleaner Dry-type exhaust aspirated
Aspiration Turbocharged and air-to-air aftercooled
Cooling Medium Liquid
Electrical System 24 Volt DC
Oil Filter Full flow
Make and Model Caterpillar C13 ACERT Tier 4 Final
Gross Horsepower 415hp (309.5kw)
Rated Engine RPM 2100
Number of Cylinders 6
Fuel Tank Capacity 200gal (757.1L)
Operating Range 9.39 hours
Fuel Consumption at Full Load 21.3gph (80.6lph)
Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles) 35deg
Air Cleaner Dry-type with pre-cleaner
Aspiration Turbocharged and air-to-air aftercooled
Cooling Medium Liquid
Electrical System 24 Volt DC
Oil Filter Full flow
Auto Self Level No
Ground Pressure Minimum 9.4psi (64.8kPa)
Ground Pressure Maximum 13.9psi (95.8kPa)
Tilt Track Available No
Track Drive Type Dual path hydrostatic with planetary transmission
Track Length 176in (447cm)
Track Pad Type Single or double grouser
Track Pad Width Ranges 24 " or 30 " (61 cm or 76.2 cm)
Track Size D7G
Maximum Ground Speed - Low 57.1ft/min (17.4m/min)
Maximum Ground Speed - High 114ft/min (34.8m/min)
Parking and Emergency Brake Spring applied, hydraulic release, wet disc brake
Service Brakes Hydrostatic
Trencher Yes
Terrain Leveler Yes
Rockwheel No
Bucket Wheel No
Cab Yes
Control System TEC Plus
Air Conditioner/Heater Yes
Air Suspension Seat No
AM/FM Stereo with Weather Band Yes
Elevating Yes
Pressurized/Filtered Air Yes
Rollover Protective Structure (ROPM) Yes
Oil Tank Capacity 152gal (575.4L)
Oil Type Vermeer HyPower 68 or Vermeer HyPower 100
Pressure Setting 2500psi (172.4bar)
Pump Flow at Maximum RPM 27.9gpm (105.6L/min)
Pump Type Pressure and flow compensated (load sensing)

Literature

Excavatrices de surface compatibles Fleet Download
Fiche technique T1055III Download
Guide de ressources pour l'exploitation minière Download